Vertically Integrated Manufacturing Capabilities
Product Line
We produce close-tolerance, high-quality, high-temperature aerospace, and military fasteners, including screws, bolts, pins, and studs.
- Bolts (NSN Series 5306)
- Screws (NSN Series 5305)
- Pins (NSN Series 5315)
- Studs (NSN Series 5307)
- Threaded Rods
- Custom Specials
- AN
- MIL
- MS
- NAS
- NA
- Metric
Head Style Configurations
Aerospace Manufacturing produces all Head Style Configurations including, but not limited to the following:
- Spline Head
- 12 Point
- Socket Head
- Internal Wrenching
- Flush Head
- Hex Head
- Pan Head
- Six-Lobe
- Dovetail
- Shear Head
- Place Bolt
- Brazier Head
- Pin Head
- Round Head
- Slotted Round
- Crown Hex
- Slabbed
Recess Configurations
Aerospace Manufacturing manufactures fasteners with many types of Recess configuration including:
- Torq-Set® (Offset Cruciform)
- Torq-Set® ACR (Offset Cruciform-Ribbed)
- Phillips® (Cruciform)
- Hex Socket
- Phillips ACR®
- (Cruciform-Ribbed)
- Torx® (Six Lobed)
- Tri-Wing® (Tri-Slot)
- Dovetail Slot
- 6 Lobe
Raw Materials
- Super Alloys: Waspaloy, Titanium 6-4 and 6-6, A-286, Inconel, 17-4PH, H-11, 15-5PH, 13-8MO, MP35N, Monel 400 and 500
- Stainless Steel: 300 and 400 Series
- Alloy Steel: 8740, 4140, 4340 etc.
Process Capabilities
With forging presses, thread rolling machines, warm heading machine, and much more, AMI has the capabilities to perform: cutting-edge equipment includes, but is not limited to:
- Hot Forging
- Heat Treating
- Thread Rolling/Forming
- Centerless Grinding
- Machining
- Drilling
- Warm Heading – cold & warm
- Broaching
- Destructive and Non-Destructive Testing (NDT)
In-House Special Processes
- Heat Treating: In-house aging process
- Non-Destructive Testing (NDT) with Level II and Level III in-house certification.
- Plating/Finishing: Cadmium, cadmium fluorborate, passivation
Testing Capability
AMI’s commitment to quality is evident in our upgraded, modern, climate controlled Quality Control testing facility, which allows us to perform virtually all testing on-site. The proper equipment allows AMI to perform tension fatigue tests on specimens from a #10 screw up to 1-1/2 inch in diameter with a 260KSI UTS.
- Hardness Tests – HRC, superfcial & microhardness
- Metallography Tests
- Dimensional Inspections
- Double Shear Tests
- Tensile Strength Tests
- Stress Durability Tests
- Stress Rupture Tests
- Non-Destructing Testing (NDT) Level II and Level III inhouse certifed (MT, PT)
- Hydrogen Embrittlement Tests
Sikorsky Bolts & Screws
AMI is an approved manufacturer of Sikorsky bolts and screws. As a result, we also have a large inventory of finished products available. AMI is approved for the following Sikorsky Part Number – SS5213- on the following diameter sizes:
- SS5213-4
- SS5213-5 (2021)
- SS5213-7
- SS5213-9
- SS5213-10
- SS5213-12
If you have inquiries for Sikorsky items, we would be happy to quote them, and we may even have stock on them.